Outside hulls, exterior and interior areas.

In immersed environments Jotamastic 80 Aluminium is suitable. Primarily designed for maintenance and repair. It can be applied at sub zero surface temperatures. Suitable for properly prepared carbon steel and aged coating surfaces. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments. Specially designed for areas where optimum surface preparation is not possible or desired. It is a surface tolerant, high solids product. This is a two component polyamine cured epoxy mastic coating. Available in: 5 litre and 20 litre units.Please call us for advice.Jotun Jotamastic 80 WG is a two-component, surface-tolerant, high solids epoxy mastic coating which can be applied in low film thickness. Note: Pack size is 4.6 litres or 18.3 litres including hardener. Use the Wintergrade version for application below 10☌ and faster curing times in normal conditions. The aluminium range is particularly suited for submerged areas (look in choose colour for Aluminium or Aluminium red-toned). Aluminium flakes within the coatings create an impenetrable barrier to water and increased coating flexibility.įor best results apply two coats above the waterline and three coats below the waterline at a typical spreading rate of 8 m² per litre. Jotamastic 80 is built on the same technology platform as Jotamastic 87 and is recommended as an anti-corrosive coating for steel above and below water.

Jotamastic 80 is a two-pack epoxy mastic paint, which can be applied at low film thicknesses (from 75 to 200 microns in a single coat).

Jotamastic 80 download free